Annual Inspection - HTW SKADI EPI-11SKABLACK Manual De Usuario E Instalacion

CLEAN GLASS DOOR
Periodically clean the glass door of the stove with a degreasing product (non-corrosive or abrasive). If the
glass is still hot, before cleaning, leave the stove door open for the time necessary to cool it. Do not use
materials that can damage or scratch the glass.
DEEP CLEANING OF THE COMBUSTION CHAMBER
Generally, once a year (preferably at the beginning of the season), extraordinary cleaning of the
combustion chamber must be carried out to allow the stove to work properly. The frequency of this
operation depends on the type of fuel used and the frequency of use. To carry out this cleaning, it is
advisable to contact a Technical Assistance Center or a distributor. The stove has a flame sensor in the
upper part of the combustion chamber, access and clean it.
CHIMNEY CLEANING (UNINSTALLATION)
It is recommended to continue with this maintenance in the extraordinary cleaning phase. Remove the
connector from the "T" socket and clean the entire duct. It is necessary that at least the first time be
performed by qualified personnel. It is also recommended to clean the "T" cap at least once a month.

ANNUAL INSPECTION

We call "annual inspection" an extraordinary maintenance, in which a complete and complete
cleaning of the stove is made, as well as a verification of the operation of all the devices of the
stove and the state of wear.
You must also clean the chimney (unloading installation) to ensure proper functioning of the
fireplace of the stove as a whole and make the necessary adjustments.
The frequency with which it must be performed is indicated in the maintenance table.
The annual inspection can only be carried out for qualified personnel or an authorized person.
END
29