Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING INSTRUCTIONS
Filling instructions
1. Remove the water tank from the unit.
2. Turn the cap of the water tank.
3. Fill water up to the MAX Line and tighten the cap.
4. Place the water tank on the unit making sure it snaps firmly into place.
5. Your garment steamer is ready to use.
Caution the unit releases hot steam, please be sure to handle the nozzle
carefully and away from any part of the body. Do not use the garment steamer
with clothes on. Do not point the mouthpiece towards your face.
How to use
1. Make sure the water tank has water.
2. Plug the unit into a suitable electrical outlet.
Warning: Care must be taken to position the cord so that it cannot be pulled or
tripped over. Always make sure that you can move freely without getting tangled in the cable.
3. Turn the knob to the temperature / type of laundry that is in the unit. The knob turns blue, that
identifies us that the unit is on. Wait a few seconds before for steam to start to come out.
Note: You may hear a knocking sound during the warm-up cycle. This is normal.
4. Grip the steam nozzle handle with the steam holes facing outward. Start from the bottom of the
fabric to allow the capoer to rise from the inside to the outside. Slowly move the nozzle from
the bottom to the top of the fabric. Remove the nozzle from the garment and smooth the fabric
with your free hand or glove.
Repeat the process as many times as necessary to achieve the desired result.
5. We do not advise to use this product horizontally. This product was designed for vertical use.
6. To turn off the manual garment steamer, turn the knob to the "OFF" position.
7. Unplug the device when not in use. Empty the reservoir and allow the garment steamer to cool
down before storing.
8. To remove the water below the water tank, place a recipient below the drain and open it. This
operation might happen when the water cool down, as some hot water could be COMING out
from the unit.
9. To use the eco function, please use the lower setting.
Accessories
Make sure the garment steamer is unplugged and cool before applying attachments. If the unit
has been in use, allow the unit to cool down completely first before changing attachments as the
press plate will still be hot.
i.
The fabric brush separates the fibres on thicker fabrics for better steam penetration. To affix
the attachment, snap the fabric brush over the press plate.
ii. The glove is to help protect your hand during steaming.
GCSTGS7050_22SEM5 (LA).indd 5
GCSTGS7050_22SEM5 (LA).indd 5
English - 5
2022/3/28 下午4:52
2022/3/28 下午4:52
Publicidad
