Publicidad
Idiomas disponibles
Idiomas disponibles
CLEANING AND MAINTENANCE
1. Unplug unit from electrical outlet and let it cool down completely.
2. Do not immerse unit or any of its parts in water. The only part that can be washed
with water is the water tank and its cap (if needed).
3. Remove water tank and dispose of water.
4. Remove any lint that might get trapped on the bristle
brush.
5. Wipe unit and nozzle faceplate with a damp smooth cloth.
6. If you notice some water leaks from your water reservoir,
please push the spring and replace in its place. To
dispose of any remaining water inside the unit, remove
the rod and the hose. CAUTION: MAKE SURE THE
UNIT IS COOLED DOWN COMPLETELY BEFORE
EMPTYING THE REMAINING WATER IN THE WATER RESERVOIR.Take unit to
the sink. Remove the water tank. Remove drainage plug located under the unit by
unscrewing it counterclockwise and dispose of any remaining water through the
drain. CAUTION: ENSURE UNIT IS UNPLUGGED.
7. NOZZLE CERAMIC FACEPLATE: Residue on the Nozzle Ceramic Faceplate can be
wiped off with a cloth soaked in a solution of water and vinegar.
8. REMOVABLE WATER TANK: Empty any water that remains in the water tank. Rinse
the water tank with fresh water several times.
9. HOUSING: The housing can be cleaned with a moist cloth and then wiped dry. Other
than the recommended cleaning, no further user maintenance should be necessary.
If for any reason your Garment Steamer should require repairs, do not try to fix it
yourself. Send it to an Oster Authorized Service Center.
The scale from tap water may build up on the major parts of the steamer over time.
De-scale your steamer regularly by the following steps:
1. Fill the water tank with solution of 700mL of white vinegar and 700mL of water.
2. Switch on the steamer to operate and let the steam release.
3. Empty the vinegar solution from the water tank and rinse with clean water.
GCSTGS7000_22SEM4 (LA).indd 6
GCSTGS7000_22SEM4 (LA).indd 6
English - 6
2022/3/28 下午4:45
2022/3/28 下午4:45
Publicidad
