Manual Mode - BoomToneDJ S-1500Pro MKII Manual De Instrucciones

the weight being carried. The unit must be screwed to the hook and
tightened properly to prevent it from falling due to vibrations produced by
the machine during operation. The hook must be secured with a safety sling.
Also make sure that the structure (or hooking point) can support at least
10X the weight of the hooked device.
XI. The unit must be installed by a qualified person and must be placed out of reach
of the public.
Getting Started with the S1500Pro-DMX
Before use, you must remove the protective foam from the
lamp!
Choice of operating mode

Manual mode

To operate your strobe in manual mode, select the DIP SWITCH N°9 to " ON ".
You can control the speed (SPEED) of the flashes with the rotary button and the
intensity (LIGHT) of the flash with the rotary button.
DMX mode
To operate your strobe in DMX mode, select DIP SWITCH N°10 to " ON ".
DMX addressing :
The DMX addressing of your S-1500Pro-MKII is done by selecting the DIP
(3) from 1 to 9.
SWITCH
Make sure that DIP SWITCH N° 10 is set to " ON ".
Dip Switch:
6