Assembling The Speaker Stand; Connecting The Speaker Cable - Fujitsu Ten Eclipse 307DMK2A Manual Del Propietário

- Assembling the speaker stand -

1
Install the cable guide and column to the base plate with
the hexagonal socket head bolt.
Tip
Align the positioning label on the column with the label
on the base plate.
2
Place the speaker onto the column, and then secure it
with the washer and the hexagonal nut.
Caution
･ Securely tighten the washer and the hexagonal nut.
･ Be careful not to damage the base of the speaker
when placing the speaker onto the stand.

- Connecting the speaker cable -

1
Insert the bare ends of the speaker cable into the holes
in the speaker input terminals and secure them in place.
Caution
When connecting the speaker cables, insert the bare
ends of the speaker cables correctly so that they do not
touch neighboring terminals, otherwise it may cause
short-circuits.
Tip
If the speaker cables are routed through the cable
guide on the stand when connecting the speaker cables
to the speaker, it will improve the outer appearance of
the speaker. (for diameter of less than 7 mm)
❷
Base plate
❶
Column
Align the labels
❷
Base plate
❸
Hexagon socket head bolt
Speaker
Washer
Hexagonal nut
Speaker stand
Speaker cables
−11−
❶
Column
❹
Cable guide
❶
Column
⊖ ⊕
Speaker cables
❹
Cable guide