Descargar Imprimir esta página

Technical Characteristics - BoomToneDJ Starlight-LZR Manual Del Usuario

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

the NF X 08-003 standard "Graphic symbols and pictograms - colors and safety signs"
of December 1994. This signage is completed by the mention of the class of the laser
device and the instructions provided in standard NF EN 60825-1. These accesses can
be controlled, at least when lasers are in operation.
Emission control: the control panel should be placed outside of locations exposed to
hazardous emissions. The control of Class 3 and 4 lasers must be under the control of
a control key, removed when not in use and held by a qualified person.
Warning:
The use of this device is exclusively reserved for professional entertainment and
display activities.
When in use, this device must be installed so that the rays remain above the eye
level of the public and do not reach them in any case.
It is forbidden to use this device for any purpose other than that for which it is
intended.
The manufacturer and distributor are not responsible for any damage caused by the
BoomtoneDJ LASER. The user is responsible for the use and compliance with the
regulations NF EN 60825-1:2014.

2- Technical characteristics

LED light set
Light sources:
2 x 10W RGBW 4in1 LEDs
LASER: 100mW red + 40mW green
Strip: 16 LED RGB 3in1
4 operating modes: DMX, Automatic, Music detection, Remote control
Coverage angle: 120 degrees
Remote control included
DMX:15 channels
Maximum power consumption : 30W
Power supply :AC100-240V 50/60Hz
Dimensions:L 215 × W 215 × H185mm
Weight:1.35 kg
This intelligent projector complies with the current Euro pean
standa rds : EN 20 14/3 0/EU, EN 2 011/ 65/ EU , EN 201 4/35/ EU.
14

Publicidad

loading