Publicidad
Idiomas disponibles
Idiomas disponibles
ply. Remove and empty the debris collec-
tion bag. Ensure that the Vacuum / Blow
selector lever operates smoothly and that it
is not obstructed by debris. Brush any loose
debris from around the fan and inside the
suction/blower tube.
Do not use any type of cleaning solvent
on the plastic parts of the Vacuum-Blower.
Power Cord Maintenance
If the supply cord needs replacing, the task
must be carried out by the manufacturer,
the manufacturer's agent, or an author-
ised service centre in order to avoid a
safety hazard.
Troubleshooting
Attention! Always remove the plug
from the mains socket before start-
ing any work on the machine.
• The machine won't start: Check
whether the switch is in the "ON" posi-
tion; check that the residual current cir-
cuit breaker is not switched off and that
no fuses have blown in its electric circuit.
If the machine still won't start have it
inspected by an authorised customer
service firm.
• The machine won't vacuum: Check
whether the leaf collection bag is full. If
it is, empty it; check whether the lever
for the reversing flap is in the correct
position, otherwise have the machine
inspected by an authorised customer
service firm.
• The machine won't blow: Check
whether the lever for the reversing flap
is in the correct position, otherwise have
the machine inspected by an authorised
customer service firm.
• The shredder wheel is blocked:
Check whether an object has been
sucked in that is too large; a piece of
wood, cardboard or other object has be-
come jammed between the impeller and
shredder chamber. If the shredder wheel
remains blocked have the machine in-
spected by an authorised customer ser-
vice firm.
• If the machine vibrates, please imme-
diately stop using it. Have the machine
inspected by an authorised customer
service firm.
Waste disposal and environ-
mental protection
If your device should become useless some-
where in the future or you do not need it
any longer, do not dispose of the device
together with your domestic refuse, but
dispose of it in an environmentally friendly
manner. Please dispose of the device itself
at an according collecting/recycling point.
By doing so, plastic and metal parts can
be separated and recycled. Information
concerning the disposal of materials and
devices are available from your local ad-
ministration.
EC Declaration of Conformity
We, ikra GmbH, Schlesier Straße 36,
D-64839 Münster / Altheim, declare un-
der our sole responsibility that the product
Electric Leaf Blower FLB 3000 A1, to
which this declaration relates correspond
to the relevant basic safety and health
requirements of Directives 2006/42/EC
(Machinery Directive), 2004/108/EC (EMC-
Guideline), 2011/65/EU (RoHS directive)
and 2000/14/EC (Noise directive) incl.
modifications. For the relevant implemen-
tation of the safety and health requirements
mentioned in the Directives, the following
standards and/or technical specification(s)
have been respected:
GB
68
Publicidad
