Motorola HS800 Guia Del Usuario página 11

Manuel HS800 05/03/2004
English
Any of the eight paired devices can initiate a paired connection to the speaker.
The speaker will only automatically initiate a paired connection (when powered on) with the last
device it was connected to. If you want to connect the speaker to another device in the paired device
list, you must initiate the connection from that device. Whichever of the eight devices initiates a
connection to the speaker afterwards, that device then becomes the "last connected" device.
Note: in case the connection is lost, you can manually connect the speaker to the phone by pressing
the multifunction button.
Placing and receiving calls
You can use the phone as usual to dial a number.
Your speaker supports both Hands Free and Headset Profiles. Accessing call functions depend on
which profile your phone supports. You can activate call functions for both Hands Free and Headset
Profiles according to the following table:
Short press multifunction button:
Long press multifunction button:
Short press volume:
Long press volume:
Note: phones supporting only the headset profile will only recognize functions associated with the
short press multifunction button action. When dialing up, a short press may either activate voice dial
or redial the last number dialed depending on the phone's settings.
8
13:17 Page 11
Answer a call
End a call
Activate Voice dialing
Put active call on hold to answer another incoming call
Toggle between 2 active calls
Reject incoming call
End call on hold
While in call, add another incoming call