How To Use External Control - JVC TM-A170G Instrucciones

HOW TO USE EXTERNAL
CONTROL
ABOUT EXTERNAL CONTROL
This monitor is provided with an external control terminal.
The function is controlled with H and L (short-circuit/open with the 15th pin GND)
Note:
● The ASPECT RATIO or INPUT function can be controlled via the REMOTE terminal by setting ASPECT REMOTE or INPUT
REMOTE to ON in the <SET-UP MENU> screen. (Refer to pages 9 and 10.)
Connections
Connect (short-circuit) the 15th terminal (GND) to the 2nd or 10th terminals in the 3-line 15-pin D-sub connector. Do not connect
other terminals.
External control switch
External
control
Open circuit
functions
(open)
ASPECT RATIO 4-3 (4:3)
External control switch
Closed circuit (short)
14
LCT1266-001A-H(EN)
Closed circuit
(short)
16-9 (16:9)
Open circuit (open)
ASPECT
GND
16
External
control
functions
INPUT
External control switch
INPUT
Closed circuit (short)
10
15
2
02.7.5, 9:36 AM
External control switch
Open circuit Closed circuit
(open) (short)
INPUT A INPUT B
Open circuit (open)