Descargar Imprimir esta página

Mellerware Frothy! Inox Manual De Instrucciones página 5

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 8
Do not use the appliance when
empty.
Respect the MAX and MIN levels.
Use the appliance handle, to
catch it or move it.
Disconnect the appliance from the
mains when not in use and before
undertaking any cleaning task.
Store this appliance out of reach of
children and/or persons with physical,
sensory or reduced mental or lack of
experience and knowledge.
Do not store the appliance if it is
still hot.
Take care when handling recipients
containing liquids heated in this
appliance as they may boil fiercely.
Only use the appliance with the base
provided.
Service
Any misuse or failure to follow the
instructions for use renders the
guarantee and the manufacturer's
liability null and void.
Description
A – Lid
B – Milk frother accessory
C – Milk container
D – Jug handle
E – Heating plate
F – Main body
G – Power cord
H – On/off button
I – Luminous ring
J – Hot milk accessory
If the model of your appliance does
not have the accessories described
above, they can also be bought
separately from the Technical
Assistance Service.
Instructions for use
BEFORE USE
Make sure that all the product's
packaging has been removed.
time, clean the parts that will come
into contact with food in the manner
described in the cleaning section.
Before using the product for the
first time and in order to make it
completely free of dust and other
impurities, it is advisable to heat
water in it and then throw it away.
This appliance has been created
to heat milk and prepare chocolate.
Do not use it for other uses.
USE
TIP: Use cold, fresh, whole or
semi-skimmed milk.
ATTENTION: The bottom of the jug
must be dry before using the device.
Fully extend the cord before
plugging in.
Plug the appliance into the mains.
Take the jug (C), remove the lid (A)
and attach the accessory
according to whether you want to
froth (accessory B) or just heat
(accessory J).
Put the milk inside the jug. The
amount of milk must be between
MIN and MAX.
Place the correctly coupled jug on
the heating base (E).
EN
ES

Publicidad

loading