Service - Grube RJ12 Manual Del Propietário

Maintenance and Service
7 . To set the wire so that the lifting arm meets the
flange:
• for a shorter time: turn the two nuts (D) in the
direction towards the machine .
• for a longer time: turn the two nuts (D) in the
direction from the machine .
D
8 . Repeat steps 5-8 until the test is successful .

6 .6 Service

WARNING The user must only do maintenance
that is described in this manual on the machine .
Only approved and trained service technicians can
do service on the machine .
Contact the reseller if the machine needs to be
serviced . Pack it in its original packaging for safe
shipping .
29 RJ12_v1_EN_220223
RJ12