WERKU WK500480 Instrucciones Originales página 2

ENG
CE DECLARATION CONFORMITY.
Werku ® declares that the paint spray gun
►
WK500480 is in accordance with the European
Directives and Standards 2006/42/CE and
EN1953:1998.
La Coruña, 04/01/2019.
R Yáñez
Werku Tools SA
TECHNICAL CHARACTERISTICS.
Compressor 2 hp
► ►
Maximum pressure 10 bar
►
transfer >70% Air consumption 100 l/min
►
diameters > 5 x 8 mm
mm Cup capacity 1000 ml
►
SAFETY INSTRUCTIONS.
Read all security warnings and all instructions
►
Failure to follow all warnings and instructions
►
listed below may result in electrical shock, fire
and/or serious injury
instructions for future reference
avoided in many cases by recognizing a potentially
hazardous situation before it occurs and by
observing appropriate safety procedures
use this paint spray gun for other applications than
those specified in this manual.
WORK AREA SAFETY.
Keep work area clean and well lit
►
and dark areas invite accidents
pneumatic tools in explosive atmospheres, such
as in the presence of flammable liquids, gases
or dusts Keep away from children and curious
►
while operating a pneumatic tool
cause you to lose control.
PERSONAL SAFETY.
Stay alert, watch what you are doing and use
►
common sense when operating a pneumatic tool
Do not use a pneumatic tool while tired or under
►
the influence of drugs, alcohol or medicines
moment of inattention while operating pneumatic
tools may cause damage serious personal.
Working pressure 1.5-3 bar
Air inlet 1/4"
►
Nozzle diameter 1.3 / 1.5
►
Net weight 1 kg.
►
Keep all warnings and all
►
Accidents can be
►
►
Cluttered
►
Do not handle
►
Distractions can
►
USE PPE'S.
Use protection glasses according EN166
►
protection masks according EN149
the type of work, use other precise PPE.
DO NOT WORK ON TIPTOES.
Keep your feet on the ground and balance
►
at all times
pneumatic tool in unexpected situations.
DRESS PROPERLY.
Do not wear loose clothing or jewelry
►
your hair, clothing and gloves away from moving
parts Loose clothes, jewelry or long hair can be
►
Paint caught in moving parts
►
Hose connecting means for extracting and collecting
►
dust, make sure they are connected and properly
used The use of these devices can reduce dust
►
related hazards.
CONNECTIONS AND AIR TYPE.
Quick connections should be used for
►
connections with the compressed air system and
male non-watertight sleeve must be installed in
the paint spray gun so that no air is compressed
after the disconnection
combustible gases or any other bottled gases
Do not
Never use oxygen tanks, fuel gas, etc. as a
►
power source for the paint spray gun
these gases or other bottled gases is dangerous,
because the paint spray gun could explode
only clean, dry and regulated compressed air.
MAXIMUM PRESSURE.
The paint spray gun should be connected to a
►
source of compressed air if the pressure does not
exceeded more than 10% the maximum allowable
pressure of the paint spray gun; in case of higher
pressures a pressure reducing valve should be
installed, including a valve-up downstream in the
supply of compressed air.
DO NOT POINT THE PAINT SPRAY GUN.
Never aim it at yourself or others, being the
►
A paint spray gun loaded or not
►
the paint spray gun, use the paint spray gun as a
professional tool.
2
English
This enables better control of the
►
f there are devices for
►
Never use oxygen,
►
Never play with
►
Use
►
If required by
►
Keep
►
Use of
►
Use
►