1
5. Fit the Upper Cross Assembly with English warning label (A) into the Upper Headboard Posts (B and C)
properly and fasten into place with two 1/2" Bolts (1). Make sure the metal tabs on the Headboard Posts
(B and C) face inward.
6. Attach one Side Stretcher (S) between the Upper Headboard Posts (B and C) with two 1/2" Bolts (1) as
shown.
NOTE: Do not fully tighten the bolts.
ASSEMBLY INSTRUCTIONS
A
B
S
① x 4
8
1
C
1