press the Oscillation Button (7).
3.4. Once you have finished using the appliance:
3.4.1. Allow fan blade to come to a complete stop.
3.4.2. Unplug the appliance from the mains power
supply.
3.4.3. Clean the appliance as described in the cleaning
section.
4. Cleaning:
4.1. Disconnect the appliance from the mains power
supply and allow it to cool completely before undertak-
ing any cleaning task.
4.2. Remove the front grill in order to clean the propel-
ler. When removing the front grill to clean the propeller,
make sure that the fan is unplugged before removing
the guard.
4.3. Clean the outer parts of the appliance with a damp
cloth with a few drops of washing-up liquid and then
dry. CAUTION! Do not immerse electrical parts of the
appliance in any liquid.
4.4. Do not use solvents, or products with an acid
or base pH such as bleach or abrasive products, for
cleaning the appliance.
4.5. Never submerge the appliance in water or any
other liquid or place it under running water.
5. Anomalies and repair
5.1. Take the appliance to an authorised support centre
if product is damaged or other problems arise.
5.2. If the connection to the mains has been damaged,
it must be replaced and you should proceed as you
would in the case of damage
6. Recycling
6.1. These electrical products, cables, batteries,
packaging, and the manual, should not be mixed with
general household waste. For proper recycling, please
take these products to your nearest Creative House-
wares office where they will be accepted for recycling
free of charge.
6.2. Alternatively, please contact your local authority or
household waste disposal service for further details of
your nearest designated collection point. Correct prod-
uct disposal saves resources and prevents negative
effects on human health and the environment.