Publicidad
Idiomas disponibles
Idiomas disponibles
AUX. HANDLE AND ADJUSTMENT STOPPER
Install the aux. handle (7) on the head of the housing and insert the adjustment stopper (6) in the hole
provided.
The aux. handle can swivel 360° for the most comfortable position and easiest operation.
The stopper helps keep an accurate depth when drilling holes.
MAINTENANCE
After use, check the tool to make sure that it is in top condition. It is recommended that you take this tool to an
Authorised Service Centre for a thorough cleaning and lubrication at least once a year.
DO NOT MAKE ANY ADJUSTMENTS WHILE THE MOTOR IS IN MOTION.
ALWAYS DISCONNECT THE POWER CORD FROM THE RECEPTACLE BEFORE CHANGING
REMOVABLE OR EXPENDABLE PARTS (BLADE, BIT, SANDING PAPER ETC.), LUBRICATING OR
WORKING ON THE UNIT.
WARNING!
To ensure safety and reliability, all repairs should be performed by an AUTHORISED SERVICE CENTRE or
other QUALIFIED SERVICE ORGANISATION.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
WARNING To reduce the risk of injury, user must read instruction manual
Class II construction tool in which protection against electric shock does not rely on basic
insulation only, but in which additional safety precaution, such as double insulation or reinforced insulation,
are provided.
6
Publicidad
