Whalen BBAVT27-MBC Manual De Instrucciones página 2

G E N E R A L I N F O R M A T I O N , T I P S A N D T R I C K S
1. Please read the Assembly Instructions prior to assembling this product.
2. Remove all hardware from box and sort by size.
3. Check to see that all hardware and parts are present BEFORE assembling.
4. Ask a friend to assist you with the assembly of this furniture.
5. To avoid damage, assemble the product on a sturdy, level and protective surface.
6. Please wait until all steps are completed before tightening bolts.
7. Make sure all bolts are tightly fastened before the unit is used.
This product is sold with one set of Tipping Restraint Hardware Kit. You must install the Tipping Restraint
Hardware between the wall and the tower to prevent any accidents or damages. When properly installed,
this restraint can provide protection against the unexpected tipping of the unit due to small tremors, bumps
or climbing. The restraint is only a deterrent and is not a substitute for proper adult supervision. Use of tip-
over restraints may only reduce, but not eliminate, the risk of tip-over.
 Unit must be placed on a level surface or leveled with included hardware (when applicable).
 Do not sit or stand on or allow children to climb, sit or stand on the assembled product.
 For safety reasons, it is imperative that this unit be mounted to the wall.
 Do not use without installing the tip restraint.
 Unit can tip over causing severe injury or death.
 Do not exceed the recommended weight limits.
 Evenly distribute the weight on each level and always keep the heavier loads on the bottom.
 Before cutting, drilling or hammering into any wall or floor surface, verify the location of electrical,
plumbing and gas lines. Cutting may cause serious injury.
WARNING
2