Assembly Instructions
1
B
A
1/4" x 5/8" Bolt
(4 used in this step)
①
DO NOT fully tighten the bolts or nuts initially until all the bolts or nuts are
ready to assemble. To avoid causing damages to the thread, DO NOT over-tighten the nuts or bolts.
1. Unpack the unit and confirm that you have all the hardware and required parts.
2. Lay one Backrest (A) on a smooth and protective surface with the threaded sockets facing up.
3. Attach one Seat (B) to the Backrest (A) with four 5/8" Bolts (1).
DO NOT
fully tighten the bolts.
4