Whalen SPUS-FBBK-GM Manual De Instrucciones página 7

A
F
B
6. Repeat the same procedure to attach the Right Side Panel (C) on the opposite side.
7. Securely screw the Floor Levelers (6) into the threaded sockets on the bottom of Side Panels (B and C).
8. Now, go back and securely tighten all the cam locks. Make sure that all the parts are tight and there are
no gaps between the parts. This will help keep the unit square.
9. Stand the assembled unit upright and position it near the final location.
10. Unfold the Back Panel (G) and align the drilled holes on the Back Panel to the pilot holes on the Top Back
Stretcher (F) properly. Fasten the Back Panel (G) into place with the provided 12 mm Screws (4).
NOTE: We recommend attaching back panel with the washer head screws at the corners first.
Assembly Instructions
C
D
C
7
3
D
C
1
A
G
B/C
6
G
4
The adhesive tape
faces outward