Beper P101CUD250 Manual De Instrucciones página 7

Cotton Candy Maker Use instructions
This appliance is for household use only.
To protect against electric shock, do not immerse cord, plug or any
parts of the appliance into water or other fluids.
Do not use the appliance near explosives, highly flammable mate-
rials, gases or burning flames.
Do not allow children, disabled people or every pe-
ople without experience or technical ability to use
the appliance if they are not properly watched over.
Close supervision is necessary when any appliance
used by or near children.
Product Descriptions FIG.A
1. Main unit
2. Heating element
3. Turntable
4. Bowl
5. Splash guard
6. On / off switch (I / 0)
7. Measuring spoon
Instructions for Use
Before using for the first time, wash the bowl, the splash guard, the turntable and the measuring cup with luke-
warm water and dry carefully.
Place the main unit on a stable, horizontal surface.
Insert the bowl onto the main unit.
Mount the turntable on the pin located in the center of the heating element.
Place the splash guard on the bowl, fixing it firmly with the ring located on the edge of the splash guard.
Attention:Improper positioning of the turntable can lead to the machine not making cotton candy or
to excessive vibrations.
Plug the power cord into the electrical outlet and turn on the cotton candy machine by setting the On / Off switch
to "I". Let it heat for 5 minutes (the heating element will light up).
Turn off the cotton candy machine by setting the switch to "O".
Wait for the turntable to stop completely.
Put the sugar inside the turntable using the appropriate measuring cup.
Attention: do not put sugar inside the turntable when the cotton candy machine is running.
Put a maximum of one measuring spoon (about 15 g) of sugar or candies with a total weight not
exceeding 15 g. Excessive quantity of ingredients could cause noise and vibrations. Use granulated
sugar, packages prepared for cotton candy, or candies that can be used for the cotton candy ma-
chines.
7
EN