EN
WHAT PELLETS TO USE?
Pellets are pressed wood cylinders, products from wooden sawdust and wood work residues (shavings and wooden sawdust),
generally produced by sawmills and carpentry. The binding power of lignine, contained in the wood, makes it possible to ob-
tain a compact product without addition of additives and chemicals foreign to wood: we therefore obtain a natural fuel at high
yield.
The use of poor quality pellets or any other inappropriate material can damage certain components of the stove and harm its
proper functioning: this can lead to the termination of the guarantee and the relative responsibility of the manufacturer.
Use pellets with a diameter of 6mm, type DIN Plus or EN Plus A1, or equivalent, with a maximum moisture content of 8% and a
maximum length of 30mm.
Keep the pellets away from heat sources and not in a damp place or with an explosive atmosphere.
LOADING THE PELLET TANK
Open the tank door
Pour half the capacity of the tank and wait for the pellets to be deposited at
the bottom
Complete the operation by pouring the second half
Before closing the door, make sure that there are no pellet residues around
the edges. If necessary, clean carefully.
Tank capacity: 16 kg
COMMANDS AND DISPLAY
Spark plug
indicator
Current time
Day of the week
Temperature
indicator
SETTINGS
Switch on
Place the switch on the back of
the device on the "I" position
Day of week adjustment
Press
, the screen displays
"MN01" then the day of the week
Adjust the day using the buttons
and
day1
day2
day3
Monday
Tuesday Wednesday Thursday
Pellet
Smoke
Ambient
loading
extractor
air fan
indicator
indicator
indicator
Reception of the
Active program
remote control signal
indicator
day4
day5
day6
Friday
Saturday
Alarm
Heating indicator
Hours adjustment
• Press
, the screen displays
"MN02" then the current time
• Set the time using the buttons
and
Minutes adjustment
Press
, the screen displays
"MN03" then the current minutes
Adjust the minutes using the but-
tons
and
day7
Sunday
50
• Adjust the power
• Increase temperature or power
• Start or stop
• Get out of the menu
Select the menu
• Adjust the set temperature
• Reduce temperature or power