Assembly Of Product - Urban E701 Guia Del Usuario

ASSEMBLY OF PRODUCT

10 ASSEMBLY OF PRODUCT
Fig. 10
1- Aluminium Filter
Fig. 11
1- Air Outlet Duct
Fig. 12
20
Prepare the mount surface in align with the dimensions specified in
the technical illustration ().
1. Remove the appliance package and place the aluminium fil-
ters facing upwards. (Fig. 10).
Press the aluminium filter latch (Fig. 10/1) and pull upwards
(Fig. 10/2) to remove.
2. Place the air discharge pipe on the plastic flue on the hood
(Fig. 11).
If the air discharge pipe diameter is smaller
than Ø150mm, you can use the
Ø150/120mm plastic flue adapter supplied
with the appliance.
Place the front surface of the hood in full contact with the
front surface of the cupboard.(Fig. 11).
3. Mount the hood through the mounting holes on the shorter
right and left sides with 3 pcs. of 3.9x16 screws to the cup-
board (Fig. 12).
HOOD USER GUIDE 03.12.2018