Setting the time
After selecting a programme, you can set the desired time by using the increase/decrease dial. The
remaining time is shown on the display.
Setting the hardness
This feature can only be selected for the ice cream programme. To set the hardness, press the hardness
setting button. The bars representing hardness appear on the display (instead of for the time).
Then turn the dial to increase or decrease. There are three hardness settings:
·
Soft:
·
Medium:
·
Hard:
During operation, the appliance will measure the hardness and show it on the display. The elapsed time
is shown on the display. Once the desired hardness is reached, the appliance stops making ice cream and
switches over to the automatic cooling feature. The maximum time is 70 minutes. If the desired hardness
has been reached and you want to stop the process completely before the time runs out, press the start-
pause button for a few seconds and the appliance will switch off.
Setting the mixing speed
In the ice cream and mix programmes, you can control the mix speed to achieve a different taste
experience each time. The more rotations per minute, the airier the mix, the fewer the ice crystals, and
the more intense the flavour. Press the mixing speed button and the speed will change each time you
press the button. There are three speed settings:
·
Slow:
·
Medium:
·
Fast:
The default setting is medium speed.
Notes
! Do not use metal objects in the bowl to avoid scratching.
! Never knock the removable bowl or the edge of the bowl onto for instance a table to remove the ice
cream. This will damage the bowl.
! The ice cream machine has overheating protection. Allow the machine to cool down between two
preparations.
·
To stop or restart the mixing paddle during the process, briefly press the start-pause button. The
compressor continues cooling for 3 minutes. Thereafter, the unit will switch off completely.
·
To stop the process completely before the time runs out, press the start-pause button for a few
seconds and the appliance will switch off.
·
If you want to adjust the time when the machine is in operation, first press the start-pause button. You
can then adjust the time with the dial to decrease/increase. Thereafter, press the start-pause button
again to resume operation.
·
When the ice cream becomes too hard, the motor could get blocked. The self-protection function
makes sure that the motor is automatically stopped in that case.
www.domo-elektro.be
29
DO9232I