Publicidad
Idiomas disponibles
Idiomas disponibles
MA-30M / MA-60M
AMPLIFIER
5.4. 100 V / 70 V LINE SPEAKERS
Connect the speakers in parallel. The sum in W of all speakers connected to the amplifier must not
exceed its power, 30 W for MA‐30M and 60 W for MA‐60M.
NOTE: The minimum wire section is 1.5 mm², but it can be increased according to the installation
requirements. If speakers don't indicate the power at 70 V, this can be considered the half of the
one at 100 V. Don't never use different speaker outputs simultaneously.
5.5. 4 Ω LINE SPEAKERS
Connect the speakers in series or parallel. The total impedance of the speaker line must be 4 Ω, and
the sum of power supported by the speakers must be 30 W for MA‐30M and 60 W for MA‐60M.
NOTE: The minimum wire section is 2.5 mm², but it can be increased according to the installation
requirements. Don't never use different speaker outputs simultaneously.
MA-30M / MA-60M Version 1.0
Page 7 of 11
Publicidad
