EQUATION SC-3G40A Instrucciones De Montaje página 59

7.Service guide
FR
ES
Notes If the humidifier does not work properly after the following treatments,
please contact the customer service center or local service station.
PT
IT
EL
Fault phenomenon
PL
RO
EN
The humidi er does not
work
The mist from the
humidi er smells bad
The humidifying e ect
is not ideal
There is abnormal
noise
The water shortage
warning remains in
e ect, although water
is available in the
water tank
While water is available
in the water tank, the
water shortage warning
remains in e ect, and
the humidi er doesn't
work for a long time
There is water leakage
after lling
57
Possible causes
The power plug is not plugged
well
There is no water in the water
tank
The water tank is not in place
The water is dirty or storage
duration is too long
The mist vent is clogged
The humidi er is tilted or
unstable or is not placed securely
The water in the water tank is
owing to the sink, and it has
not reached the normal
working level
Excessive tilting of the humidi er
at an angle results in the water
level in the sink being thought
too low, so the humidi er has
stopped working due to
automatic protection
The foam used to x the oat
ball has not been taken out
Handling method
The power plus is plugged well
The water is added to the tank
The water tank must be put in
place and fastened
Replace clean water or clean
the water tank and sink
Rotate the mist vent to the
maximum
Put the humidi er on a solid
surface or a at place
Wait for 1min before starting
the humidi er
Put the humidi er on a at
and solid place to, and kept it
steady
Please remove the foam used
to x the oat ball in
accordance with 1 hereof