Publicidad
Idiomas disponibles
Idiomas disponibles
For safety reasons, the manufacturer recommends all pump service and repairs be
performed by an authorized service center. All warranty replacements or repairs must be
performed by an authorized distribution or service center. To find an authorized service
center near you, to make a warranty claim, or for authorized warranty repair, call 1-877-362-
4271 or email cservice@fna-group.com.
It is the responsibility of the owner and/or operator to have all scheduled maintenance
completed before operating the pump. Be sure to follow the inspection and maintenance
recommendations as listed in all the manuals that came with this unit.
Pump maintenance
Maintenance: Before each use, check pump for loose or damaged parts, and any other
condition that may affect proper operation. Be sure all safety guards are in place and in
proper working order. Inspect all air vents and cooling slots to ensure they are clean and
unobstructed. Repair or replace all damaged or defective parts immediately. For safety
reasons, the manufacturer recommends all pump service and repairs be performed by an
authorized service center. To find an authorized service center near you, obtain information
about how to make a warranty claim, or to make arrangements for authorized warranty
repairs, please call 1-877-362-4271 or email cservice@fna-group.com.
Improper engine and pump maintenance as well as failing to correct problems before
operation could void the warranty and may result in property damage and injury. To
prevent these hazards, follow the maintenance procedures listed in this manual and
any other manual that came with this product.
Exterior Pump Cleaning: Always clean the pump with the engine off and cool. To clean
the pump, first use an air compressor set at 25 PSI to clear dirt and debris from the pump
surfaces, vents, and cooling slots. Next, wipe the exterior clean with a damp cloth.
Water can damage the pump engine components if allowed to enter through cooling
slots or other holes. Damage caused by water intrusion is not covered under warranty.
To avoid engine water damage, do not use a pressure washer, garden hose, or any
other sources of running water to clean the pump engine, and never submerge the pump
engine in any liquids.
Using chemical cleaners and/or corrosive liquids can damage the pump seals and internal
components. Damage caused by chemical cleaners and corrosive liquids is not covered
under warranty. To avoid damaging pump seals and components, do not use chemical cleaners
and corrosive liquids to clean the components inside of the pump housing.
Page 17
MAINTENANCE
MAINTENANCE
CLEANING
CHEMICAL CLEANERS
Publicidad
