Storage And Maintenance - Nosiboo pro2 Manual De Usuario

7. Storage and maintenance

Storage
1. Unplug the power cord from the wall socket only after the
device has completely shut off.
NOTE: After the device is switched off, the power cord should
be unplugged from the electrical outlet and from the device by
grasping the plug.
2. Disconnect the connecting tube from the device and the
Colibri head.
A sérülés elkerülése érdekében ne törje meg a hálózati kábelt, és
ne helyezzen rá súlyos tárgyakat. A kábelt csak a csatlakozónál
fogva húzza ki a hálózati aljzatból! A sérült hálózati kábel áramütést
okozhat.
3. Keep the device in an enclosed space where it is protected from
dust and damage (e.g., in a cabinet).
NOTE: Do not store near a heat source.
Maintenance
There is a special air mesh behind the connecting unit which pre-
vents solid objects and dust from entering the housing. In the event
of an unexpected drop in performance, it is recommended that
you check the air mesh. If the air mesh is dirty or clogged, replace
it with a spare air mesh. (A list of spare parts can be found in the
"Accessories, spare parts" section.)
!
WARNING
Protect the power cord against damage.
DO!
Keep the power cord away from heat.
Do not leave the parts of the dismounted Colibri
head within reach of children. Children may
swallow the small parts.
Do not break the power cord, and do not place
DON'T!
heavy items on the cord, to avoid damage.
Grasp the plug to unplug the power cord from
the electrical socket. A damaged cord may
cause electric shock.
Do not wind the power cord around the device.
A damaged power cord can cause electric fire!
!
CAUTION
Make sure that all parts are clean and dried
thoroughly before use.
Store the device in a clean, dry place. Avoid
DO!
direct sunlight or heat.