Vonyx STM-3007 Manual De Instrucciones página 5

13. MASTER BALANCE CONTROL
Lets you adjust master balance.
14. MASTER LEVEL CONTROL
Lets you control mixer's overall master volume level.
15. ZONE MONO/STEREO SELECTOR
Select mono mode or stereo mode.
16. ZONE BALANCE CONTROL
Lets you adjust zone balance.
17. ZONE LEVEL CONTROL
Lets you control mixer's overall zone volume level.
18. ECHO ON/OFF
Turn echo on or off.
19. ECHO DELAY CONTROL
Lets you adjust the delay tine for echo.
20. 12V POWER SUPPLY JACK
Allows you to connect 12v power supply via this jack.
21. POWER SWITCH
Use this switch to turn on the unit after all input devices are already connected to prevent damage to you equipment. Turn
the mixer on before you turn on amplifier and turn of amplifiers before you turn off the mixer.
22. EQUALIZER ON/OFF
Press it to turn equalizer on, the indicator light.
23. MIC BASS
This knob adjusts the bass tone of the microphone.
24. MIC LEVEL CONTROL
Let you control the MIC level as they enter the mix.
25. MIC TALK OVER
There are talk over, MIC on and MIC off function. The Sound Pressure Level of audio from input sources will be decreased
while TALK OVER mode is set.
26. MIC CUE
Use it to monitor the MIC input source
27. KILL FOR BASS
Press it to kill microphone bass volume, and indicator light.
28. CHANNEL ASSIGN SELECTOR
Lets you select the input source to be mixed by the crossfader control.
29. CROSSFADER
Allow you to smoothly switch between the input sources assigned to channel A and channel B.
30. SOUND EFFECTS
Lets you create special sound performance mixes from the eight pre-programmed special effects.
31. SOUND EFFECTS SPEED CONTROL
Lets you control the pitch of the selected sound effect.
32. SOUND EFFECTS VOLUME CONTROL
Lets you control the volume level of the sound effect within the mix.
33. ECHO LEVEL CONTROL
Control the depth of the echo effect.
34. SOUNCD EFFECTS CUE
Lets you monitor the selected sound effect before mixing it in.
35. ECHO REPEAT CONTROL
Lets you control the time period during which the echo is repeated.
36. HEADPHONE CUE/PGM CONTROL
Allows you to listen simultaneously or separately to the CUE material or the active program.
37. HEADPHONE JACK
Accept headphone with 1/4" plug.
38. HEADPHONE LEVEL CONTROL
Lets you control the volume level of headphone.
39. EFFECT SWITCH (SEND/ RECEIVE)
Lets you connect a sound effect device, such as reverb, sampler, etc. and either play the signal from it or play another input
through it.
40. MP3 PLAYER AND BT
a. USB/SD:
b. ID3 Display:
c. Five Buttons from left to right function as follows:
i. Stop
Use this button to stop this music.
ii. Play/pause
Each time you press this button, the operation changes from play to pause or from pause to play.
iii. |<< PREVIOUS
Use this button to re-start the track or to select the previous track.
iv. >>| NEXT
Use this button to select the next track.
v. Mode select
Short press to select the usb/sd and BT function. Long press to turn on/off the mode.
Connect to USB stick and SD card.
Display to MP3's information.
5