Descargar Imprimir esta página

Kobalt KCH 2411-03 Manual De Instrucciones página 7

Publicidad

Idiomas disponibles

Idiomas disponibles

SAFETY INFORMATION
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in
order to avoid a hazard.
Do not allow gasoline, oils, petroleum-based products, etc.,
to come in contact with plastic parts. These materials contain
chemicals that can damage, weaken, or destroy plastic.
An extension cord should not be used unless absolutely
necessary. Use of an improper extension cord could result in a
risk of fire and electric shock. If an extension cord must be used,
make sure that:
The pins on the plug of extension cord are the same number,
size and shape as those of the plug on charger.
The cord is properly wired and in good electrical condition.
The size is large enough for A/C ampere rating of charger as
specified below:
Cord Length (Feet)
Cord Size (AWG)
NOTE: AWG = American Wire Gauge
Do not operate the charger with a damaged cord or plug, which
could cause shorting and electric shock. If damaged, have the
charger repaired or replaced by a qualified service technician.
Do not operate the charger if it has received a sharp blow, been
dropped, or has otherwise been damaged in any way. Take it to
a qualified service technician for an electrical check to determine
if the charger is in good working order.
Do not disassemble the charger. Take it to a qualified service
technician when service or repair is required. Incorrect
reassembly may result in a risk of electric shock or fire.
25 ft.
50 ft.
16
16
7
100 ft.
16

Publicidad

loading

Este manual también es adecuado para:

49138814913886