Mitsubishi Electric PZ-61DR-E Manual De Instalación página 12

(6) Auto mode setting
Lossnay does not support this function. Press the RETURN button to go back to the Initial setting menu screen.
(7) Administrator password setting
[Button operation]
[1] To enter the current Administrator password (4 numerical digits), move the cursor to the digit
you want to change with the F1 or F2 button, and set each number (0 through 9) with the F3 or
F4 button.
[2] Press the SELECT button.
Note: The initial administrator password is "0000". Change the default password as necessary to
prevent unauthorized access. Have the password available for those who need it.
Note: If you forget your administrator password, you can initialize the password to the default
password "0000" by pressing and holding the F1 and F2 buttons simultaneously for three
seconds on the administrator password setting screen.
[3] If the password matches, a window to enter a new password will appear. Enter a new password
in the same way as explained above, and press the SELECT button.
[4] Press the F4 button (OK) on the password change confirmation screen to save the change.
Press the F3 button (Cancel) to cancel the change.
Note: The administrator password is required to make the settings for the following items.
· Timer setting
· Restriction setting
Refer to the Instruction Book that came with the remote controller for the detailed
information about how to make the settings for these items.
(8) Language selection
[Button operation]
Move the cursor to the language you desire with the F1 through F4 buttons.
Press the SELECT button to save the setting.
All manuals and user guides at all-guides.com
· Weekly timer setting
- 12 -
Administrator password
Enter administrator password
Select:
Cursor
Administrator password
Enter administrator password
Change administrator password.
Select:
Cursor
Administrator password
Enter administrator password
Update administrator password?
Cancel OK
Language selection
English Français
Deutsch Español
Italiano
Português
Svenska
Select:
Cursor
Cursor