cecotec BOLERO DRESSCODE DRY 8500 Manual De Instrucciones página 70

ENGLISH
- The Cotton - Cupboard dry programme is the standard drying programme and is used at
full or half load. It is referred to in the information on labels of garments and items. This
programme is the most efficient for drying normal damp cotton clothes.
*Standard energy classification programme (EN 61121:2013)
- All values in the table are set in accordance with EN 61121:2013. The consumption values
may vary from the values in the table depending on the type of fabric, spin speed,
environmental conditions and current values.
Additional functions
The table below summarises the options that can be selected in the programmes.
Option Description
Dry Target Select the suitable dry target for your clothes.
Select Extra dry for thick, multi-layered laundry that takes a long time
to dry. Select Cupboard dry for normal single-layer laundry.
Select Iron dry for clothes that you wish to leave damp, ready for
ironing.
Dry Level The moisture level after drying can be increased in 3 other levels
in addition to the standard setting. This ensures that the laundry is
drier. The levels that can be selected apart from the standard setting
(Level 1) are 2 (low), 3 (medium) and 4 (high). After the selection, the
corresponding dry level light will light up.
Delicate dry* Delicate fabrics dry over a longer period of time at low temperatures.
Delay Start You can delay the programme start from 1 to 23 hours.
Press the Start/Pause button to activate the delay start time. When the
time ends, the selected programme will start automatically. During the
delay time, you can activate/deactivate options which are compatible
with the selected programme. If you hold down the Delay start button,
the delay start will change continuously.
Buzzer warning mute The dryer will beep when you press the buttons, when you turn the
programme selector and when the programme finishes. To cancel
the warnings, hold down the Options and Anti-crease buttons for
3 seconds. When you press these buttons, you will hear a warning
that the option has been activated and the indicated warnings will be
cancelled.
138
Dry Time If you turn the programmes selector knob to the Drying Time position,
you can press the Dry Time option button to select it and then press
Start/Pause to start the programme.
Child lock There is a child lock option to prevent any changes in the programme
when pressing the buttons during the programme. To activate the child
lock function, the user must hold down the Options and Anti-crease
buttons at once for 3 seconds. When the child lock is active, the other
buttons are disabled. The child lock is not automatically deactivated
at the end of the programme. To deactivate the child lock at the end of
the programme, turn the programme selection knob to the Off position.
Next, turn the programme selection knob to the first position. The
child lock will still be active. To deactivate the child lock function, the
user must hold down the Options and Anti-crease buttons at once for
3 seconds. When activating/deactivating the child lock, the display
will show «CL» for 2 seconds and then it will turn off; and you will hear
the warning. Warning: When the appliance is running or the child lock
is active, when you turn the programme selector knob, you will hear
an audible warning and the display will show «CL» for 2 seconds and
then it will turn off. If you turn the programme selection knob, you will
hear a warning. Even if you set the programme selector to another
programme, the previous selected programme will continue running.
To select a new programme, you need to deactivate the child lock and
then set the programme selection knob to the desired programme.
Anti-crease* If you do not open the door when the programme ends, the Anti-crease
option will be active for 60 minutes. When selecting the Anti-crease
option, it will be active for 120 minutes.
Selecting the spin Set the spin speed to dry the laundry. This ensures that the estimated
speed drying time is more accurately displayed.
The options will vary according to the model.
Starting a programme
The Start/Pause LED will flash during the programme selection. Press the Start/Pause button
to start the programme. The Start/Pause LED indicates that the programme has started and
the dry LED will light up.
ENGLISH
DRESSCODE DRY 8500
139
DRESSCODE DRY 8500 DARK
DRESSCODE DRY 9500