Using Your Appliance; Changing The Water Filter - Hisense HRF209N6CSE Manual De Operación Del Usuario

Using your Appliance

This section tells you how to use most of
the useful features. We recommend that
you read through them carefully before
using the appliance.
Getting Cold Water
The water dispenser is located in the left
side of the fridge. Open the refrigerator
doors, and push the water dispenser
button to get water. Then move your
glass down the dispenser lever in the
suggested position and press it.
Hold the glass underneath the dispenser
for 2~3 seconds after releasing the
dispenser button as water may continue
to dispense after the button is released.

Changing the water filter

1
To drink the freshest and cleanest water
from your refrigerator, change the filter
on time.
Please follow these steps:
1. Shut off the water supply. Then turn
the water filter (K) about a 1/4 turn,
counter-clockwise.
Note:
When having problem with releasing water
filter, please use the enclosed tool which
provide in package as above. Insert the
tool into the filter housing and rotate it
counter clock wise (to the left) 90 degrees.
Please keep for future use when changing
the water filter.
About 1.6inch
K
2. Pull the water filter (K) from the filter
holder (L).
L
Note:
To change the water filter easily, shut off
the water supply valve.
Sometimes, it is hard to disassemble the
water filter because impurities in the
water cause it to stick. If you are having
difficulties, grip the water filter firmly and
pull it out.
When you pull the water filter, a little
water can leak from the opening.
This is normal. To minimize the water
leaks, keep the filter cartridge horizontal
when pulling it.
To prevent overflow, empty the water
filter tray (M) and dry around the filter
case.
To insert the new water filter, follow the
directions below.
M
K
14