Risk of short circuit!
Do not insert any items, which are not intended for its use, into the openings of the
device. Do not operate the device with wet hands. This could result in injury from an
electrical short circuit and/or a fire.
Do not use the device if there is visible damage to it or the USB cable, as this may
result in injury or damage.
Do not expose the device to splashing or dripping water.
Vessels filled with liquids (vases, glasses or similar) must not be placed on the device
or near it. There is a risk that the container will tip over and the liquid will affect the
electrical safety.
It is normal that during the use the device produces heat. Do not completely cover
the product during use to avoid overheating.
Damage!
Keep the device away from any type of moisture and avoid dust, heat and direct
sunlight.
Do not use water or chemical solutions to clean the device. Only use a dry cloth for
this purpose.
Do not open the housing of the device and do not disassemble it into its component
parts. Do not try to repair it yourself. The guarantee expires in this case.
Avoid hard impacts to the device.
Operate the adapter only on earthed sockets with AC 100-240V~, 50/60 Hz. If the
power supply is not safe at the installation site, ask the competent power supplier.
To interrupt the power supply of your device, disconnect the power supply from the
power socket. When disconnecting, always hold the adapter. Never pull the cable.
Declaration of conformity
The CE marking says that this product meets the requirements of all EU
Directives applicable for this product.
The UKCA marking says, that this product meets the requirements of all
UK Directives applicable for this product.
Simplified declaration of conformity
Intenso International hereby declares that the Wireless Charger MB1/MW1 complies
with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is availa-
ble at the following internet address: www.intenso.eu.
EN - Page 3 of 5