Publicidad
Idiomas disponibles
Idiomas disponibles
2. Clean and straighten the open end of the
bag, make sure no dust, wrinkle or ripples.
Place the open end of the bag within the
vacuum chamber area. Make sure the air
intake is not covered by the bag. – Fig. 1
3. Press the cover down on both sides using both
hands until click sounds are heard on both sides.
-Fig.2
4. Then press Auto button, the unit start to
vacuum and will seal the bag automatically.
-Fig 3
NOTE: This product provides very high vacuum pressure during
vacuum packaging with a bag, in order to avoid crushing of
the delicate item by the high vacuum pressure, observe the
status of the vacuum pressure inside the back and switch the
"SEAL" button immediately when the desired vacuum
pressure is achieved. The machine will then stop the pump
and change to heat-seal the bag.
Tips: you also can press Pulse button continuously at first, then
press Seal button when observing the bag is tight, thus, you can
control the vacuum pressure inside.
5. The vacuum packaging is done. Press
the release buttons on the both side of
the machine simultaneously to open the
cover and take out the packed bags.
–Fig. 4
Fig.1
Fig.2
Fig.3
Fig.4
Publicidad
