Safety Instructions - Kerbl ProPig 22655 Instrucciones De Uso

(EN) User guide
1. Foreword
1.1. Information about the guide
We reserve the right to make changes due to further technical development compared to the data mentioned in this manual. Reprints, transla-
tions and reproductions in any form, including excerpts, require the written consent of the manufacturer.
2. Safety
2.1. General
This user guide includes instructions for use and safety instructions. Please read the instructions carefully and note the regulations and relevant
information before putting the device into operation. Please keep this user guide in a safe place for later use.

2.2. Safety instructions

CAUTION! Danger of fire, short-circuits and electric shock!
• Do not pull on the electrical supply cable to unplug or transport the device.
• Do not allow electrical supply cables to come into contact with heat, oil or sharp edges.
• Store the device in a dry place and protect from liquids and moisture.
Risk of physical injury and material damage if used incorrectly!
• Ensure that the device is only used by people who have the professional skills required to do so.
• Note the maintenance instructions.
• Only operate the device at the mains voltage specified.
• Do not expose the battery pack to excessive temperatures, sunlight or fire.
• Avoid all skin contact and seal the device in a good plastic bag in the case of battery leakage.
• Protect the battery pack from vibration and shocks.
• Do not use the device if the casing is broken.
• Never press the locking button while the device is running.
• Keep out of the reach of children.
• National and international safety, health and occupational safety regulations must be observed and complied with.
• Keep your workspace clean and tidy. An untidy workspace increases the risk of accidents.
• Do not work without protective goggles.
• Do not work with damaged grinding wheels or bent shafts.
• In the case of overheating, switch the device off and allow to cool for several minutes.
2.3. Charging notes
• The tooth grinder is powered via a separate battery pack.
• Only charge the battery pack with the adapter provided with the original unit #22655.
• Remove the device from the battery for charging.
• Plug the transformer's device connector into the charging socket (IN) of the battery pack.
• Insert transformer into the socket. The charge control display on the transformer lights up red.
• Maintain constant supervision when charging. Do not leave the battery pack to charge unattended and do not leave the charger plugged in overnight.
• When the charging process is complete, the charge control display on the transformer lights up green.
• Stop charging after 3 hours. The charging process does not stop automatically and overloading leads to destruction and danger to people.
• Immediately interrupt charging if you notice the battery is heating up excessively.
• With a fully charged battery pack, the tooth grinder can be used for over 2.5 hours.
3. Description
3.1. Description of the device
The ProPig tooth grinder is for grinding down sharp edges on piglets' teeth.
3.2. Included with the device
• Tooth grinder
• Battery with belt hook
• Battery charger
• Power supply cable with Euro flat plug
• Power supply cable with UK plug
• Travel bag with belt for grinding machine
• Plastic carrying case
• Operating instructions
8