Information Display; Power Off - GLI Gomer Manual Del Usuario

English

4 Information Display

After powering Gomer on, press the button. He will display connection information
on its screen including product ID,connection mode, Wi-Fi network name, and
password. Please note that if the connection is in STA mode (via router, as
explained in the next paragraph), for privacy, the password will not be displayed on
the screen.
5 Connecting Gomer to the App
In the Settings of your mobile phone, choose the Wi-Fi name displayed on the Gomer, and then enter the password.
Normally the password is 88888888, and you can reset it as desired.
If you choose to connect the app using a router, enter the Wi-Fi network name and password of your router, and then save it.
Launch the app and tap "Connect,"then choose Gomer's Wi-Fi name. You will enter into the main screen of the app.

6 Power off

Press the button for 3 seconds to power the system off.
You can also power off Gomer by tapping the "Sleep" option in the Settings part of the app.
6
Button