Electrical Requirements - Samsung DVEG50R5400 Serie Manual Del Usuario

Electrical requirements

The wiring diagram is located on the plate under
the control panel or rear frame.
WARNING
• Improperly connecting the equipment
grounding conductor can result in a risk
of electric shock. Check with a qualified
electrician or serviceman if you are in doubt as
to whether your dryer is properly grounded. Do
not modify the plug provided with your dryer –
if it doesn't fit the outlet, have a proper outlet
installed by a qualified electrician.
• To prevent unnecessary risk of fire, electrical
shock, or personal injury, all wiring and
grounding must be done in accordance with
local codes, or in the absence of local codes,
in accordance with the National Electrical
Code, ANSI/NFPA No. 70-Latest Revision (for
the U.S.) or the Canadian Electrical Code CSA
C22.1 – Latest Revisions and local codes and
ordinances. It is your responsibility to provide
adequate electrical service for your dryer.
• All gas installations must be done in
accordance with the national Fuel Code
ANSI/Z2231 – Latest Revision (for the U.S.) or
CAN/CGA – B149 Installation Codes – Latest
Revision (for Canada) and local codes and
ordinances.
Untitled-14 17
Grounding
This dryer must be grounded. In the event of
malfunction or breakdown, the ground will reduce
the risk of electrical shock by providing a path of
least resistance for the electrical current.
Gas models
WARNING
• Your dryer has a cord with an equipment-
grounding conductor and a grounding plug.
The plug must be plugged into an appropriate
outlet that is properly installed and grounded
in accordance with all local codes and
ordinances.
• Do not modify the plug provided with your
dryer – if it doesn't fit the outlet, have a proper
outlet installed by a qualified electrician.
• Do not connect the ground wire to plastic
plumbing lines, gas lines, or hot water pipes.
Electric models
WARNING
• Your dryer has an optional cord with an
equipment-grounding conductor and a
grounding plug. This cord is sold separately.
• The plug must be plugged into an appropriate
outlet that is properly installed and grounded
in accordance with all local codes and
ordinances.
• Do not modify the plug provided with your
dryer – if it doesn't fit the outlet, have a proper
outlet installed by a qualified electrician.
• If a power cord is not used and the electric
dryer is to be permanently wired, the dryer
must be connected to a permanently grounded
metal wiring system, or an equipment
grounding conductor must be run with the
circuit conductors and connected to the
equipment grounding terminal or lead on the
dryer.
English 17
2021-08-23 6:30:53