Publicidad
Idiomas disponibles
Idiomas disponibles
Getting started
Safety warning and notice
Package contents
Description of parts
Charging
Getting started
•
Take the device out of the box
•
Remove all the packaging from the product.
•
Place the packaging materials in the box or dispose of them safely according to recycling
guidelines.
Safety warning and notice
You must read and understand all instructions before using this device. The warranty will not
apply if damage is caused by failure to follow the instructions.
1. Do not sleep with the product.
2. The appliance must be placed at least 20 cm from the human body when
in use.
3. Never remove the appliance casing.
4. Never place this device on other electrical equipment.
5. Protect the power cord from being walked on or pinched, particularly at
the plugs, sockets, and the point where it exits the device. Make sure that the
power voltage corresponds to the voltage shown on the rating plate at the rear
of the device. Always pull the plug from the socket when disconnecting from
the mains. Never pull on the cord. Ensure you have completed all the other
connections before connecting the plug.
6.
Only use attachments/accessories that are recommended by the manufacturer.
7.
Entrust all device repairs to qualified repairers. A repair is needed when the device has
been damaged in any fashion, and in particular:
- if the power cord is damaged;
- if the device is immersed in a liquid;
- if the device is exposed to rain or humidity;
- if the device does not operate normally;
- or if the device has been dropped or impacted.
8.
The series panel is located on the bottom of the device.
9.
Never block the air vents.
10. Ensure you have sufficient stable space around the device for ventilation.
11. This device must be used in a moderate climate, away from direct sunlight, naked flames
or heat, heating devices, cookers or any other device (including amplifiers) that generates
heat. Do not install near a heat source.
12. The batteries (battery pack or inserted batteries) must not be exposed to excessive heat,
11
Functions
11
Technical specifications
13
Environmental protection
14
Additional information
16
Compliance declaration
- EN 11 -
16
17
17
17
18
Publicidad
