Care, Cleaning, & Storage; Battery Replacement - EarPopper EP-2100A Modo De Empleo

CARE, CLEANING, & STORAGE
Remove the nosepiece for periodic cleaning. (See Fig. 2) Clean with
mild soap and water. After cleaning, rinse with warm water and allow to
thoroughly dry before using. To reattach the nosepiece align the ribs with
the slots in the tip and push firmly.
Tip
Fig. 2
Removable Nosepiece
The outside of the device may be cleaned by wiping with a soft, damp
cloth.
DO NOT AUTOCLAVE, USE ABRASIVE CLEANERS, CHEMICALS, OR
DISINFECTENTS, AND DO NOT SUBMERGE THE EARPOPPER IN LIQUID.
Operating environment is 5° C to 40° C (41° F to 104° F), 15 - 93% RH,
700 hPa - 1060 hPa.
Store the EarPopper in a clean dry location at room temperature with the
clean nosepiece in place to protect tip from damage and dirt. Remove
battery for prolonged storage (6+ months).

BATTERY REPLACEMENT

Use the following steps to check for a dead battery:
1. Place finger over hole in the end of the nosepiece.
2. Press the Power Button to activate device.
3. If motor runs intermittently or stops, replace the battery.
Open the battery compartment by depressing the thumb tab on the back
of the device, then rock the battery cover forward and remove. Install 4 new
AAA batteries. Replace the cover by placing the front tab in the device and
then rock the thumb tab into place. (See Fig. 3)
Battery life: 4+ hours of continuous operation.
Fig. 3
5