Publicidad
The SP54 appears as a virtual serial port (also called a UART or VCP). On Microsoft Windows™,
the system will appear as a COM port, the COM port number can be found in device manager.
On macOS®, a device file is created in the / directory. S is an alpha-numeric serial string unique
to each device
/dev/tty.usbserial S
Los dispositivos incorporan un circuito convertidor USB a UART FT230X de FTDI International.
En Windows 7 o posterior, se podría instalar automáticamente un controlador (si Windows está
configurado para descargar controladores de Internet automáticamente). If this is not the case,
or if a Mac® or Linux® platform is used, the driver may be downloaded from www.ftdichip.com.
Los controladores VCP son obligatorios. For Linux® or Mac computers, the default OS drivers
should be used.
The default communications settings should be set to 115200 baud, 8 data bits, no parity, and
one stop bit. This is sometimes referred to as "115200,8,N,1". No se utiliza control de flujo.
ANSI terminal emulation should be selected
SP54
Página 14 de 28
Publicidad
Solución de problemas
