Product Guide - Ninja NC300EU Guia De Inicio Rapido

4) Processing
Bowl Release
Button
To remove the
outer bowl, hold
release button.
6.
Choose program Remove bowl
Select a program and When the program ends,
processing will begin. When hold the release button
complete, all 4 segments of on the left of the motor
the progress bar will flash base and twist bowl handle
twice and then turn off. clockwise to remove.
Make sure to plug in the unit before assembly. If the programs do not illuminate
when the power is turned on, make sure the unit is properly assembled. If the
install light is flashing, the outer bowl needs to be properly installed. If the install
light is steadily illuminated, the paddle needs to be properly installed.
Now you're ready!
Choose a recipe from the Recipe Guide and keep this
Quick Start Guide nearby for reference.
© 2021 SharkNinja Operating LLC.
NINJA is a registered trademark of SharkNinja Operating LLC.
NC300EU_QSG_MP_211119_ENG_Mv1
7. 8.
Remove lid
Press the lid unlock
button and twist
to remove lid.
Remove tub & paddle
Lift the tub out of the outer bowl.
Rinse the outer bowl lid to remove any
sticky residue or pieces wedged in the
paddle. Then remove the paddle by
pressing the paddle latch on top of the lid.
All parts are dishwasher safe on the
top-rack and can also be hand-washed.
QUICK START GUIDE – READ FIRST
CREAMI ICE CREAM MAKER

1) Product Guide

BOWL
RELEASE
BUTTON
This is NOT a blender.
Do NOT process a solid Do NOT make a smoothie or
block of ice or ice cubes. process hard, loose ingredients.
OUTER BOWL LID
Locks paddle in place.
PADDLE
This dual functioning paddle finely
shaves and mixes frozen ingredients
into the creamiest treats.
DESSERT TUBS
BPA-free tubs
and lids for making
and storing treats.
OUTER BOWL
Securely holds the tub in
place during processing.
All accessories above are
dishwasher safe on the top-rack.
Fruit must be crushed to release its juice
or combined with other ingredients and
frozen before processing.