Descargar Imprimir esta página

Troubleshooting; Warranty - Nikken KenkoAir Manual De Operación

Ocultar thumbs Ver también para KenkoAir:

Publicidad

Idiomas disponibles

Idiomas disponibles

1. Remove the front panel of the unit by pulling this panel outward from the bottom
and lifting it.
2. Remove all the filter elements and clean the reusable
prefilter as described in cleaning procedure above.
3. Replace the deodorizing filter and ULPA filter with new
components. Remove these from packaging. Assemble all
filters in the correct sequence from front to back, and with
the front side of the filter facing toward the front of the unit
as illustrated on page 4. Place in filter enclosure.
4. Replace the front panel.
The replacement pack for this product is the KenkoAir Purifier deodorizing filter and
ULPA filter, item #1444.

TROUBLESHOOTING

PROBLEM
• Unit will not operate.
• Odor is noticeable.
• Filter life indicator
continues to flash.

WARRANTY

Standard three-year limited warranty on fan motor. General parts and labor
warranted for one year.
©2011 Nikken Inc.
Appearance and specifications are subject to change without notice.
POSSIBLE CAUSES
• Unit may be unplugged.
• Front panel is not
completely closed.
• Power outlet is faulty.
• Significant pollution or
smoke in air.
• Filters require cleaning or
replacement.
• Indicator requires resetting
• Check to make sure the unit is plugged in.
• Make sure the front panel is securely in
place.
• Try a different electric outlet.
• Reduce smoke in room before using.
• Clean or replace filters.
• While unit is operating, press and hold
indicator button for three seconds to reset.
19
-9-
SOLUTIONS

Publicidad

loading

Este manual también es adecuado para:

1441