Blades Installation - Ombréa 15-701083 Instrucciones De Montaje

Blades installation

Step 1 : Position the 2nd blade of the B and B3 beam vertically with the H handle.
Step 2 : Take the part G and the pins S.
Step 3 : Position the 1st blade of the B and B3 beam vertically and insert the part G (see diagram on
next page) - insert the pins S to maintain the blades.
This should be done simultaneously on both sides, 2 people are needed.
Repeat this operation to fix all the blades to the part G.
Step 4: Check that the mechanism is working properly once the installation is complete.
Repeat this process to fix the blades on the B1 and B2 beam to the G piece.
85