EDIFIER MG300 Manual página 5

Operating instructions
●
USB audio streaming connection
1. Insert the USB cable from the speaker into the USB port on a computer, the speaker will auto-on.
2. It is USB audio streaming input by default when the speaker is powered on for the first time.
3. After the computer auto-install USB audio streaming driver, the speaker is ready to use.
Not in USB audio streaming input
1. Insert the USB cable from the speaker into the USB port on a computer.
2. Press the " " button to switch to USB audio streaming input. Red LED will be steady lit.
3. In the computer open the sound settings and select "Speaker (EDIFIER MG300)" as its output device, then the
speaker is ready to use.