Descargar Imprimir esta página

Safety Warnings; Installation/ Mounting - Caframo Seekr Pali 9510CABBX Instrucciones De Operación

Ocultar thumbs Ver también para Seekr Pali 9510CABBX:

Publicidad

Idiomas disponibles

Idiomas disponibles

IMPORTANT - READ AND SAVE THESE INSTRUCTIONS!
Thank you for purchasing Pali, SEEKR by Caframo's Marine 400W Engine Compartment
Heater. Pali is designed to maintain the temperature in your engine compartment above
freezing, preventing damage from a sudden cold snap.
The use of your Pali is not a substitute for properly winterizing your boat. If your boat
is going to be placed in storage for winter, it must be winterized.

SAFETY WARNINGS

This heater is intended for use solely as a marine engine compartment heater. This heater is
not to be used for any other applications such as room heating.

INSTALLATION/ MOUNTING

While boat is in motion the Pali must be secured to the mounting bracket.
1. Vertical Secured Mount
(Recommended for highest efficiency):
Separate the Quick Mount Bracket from
the heater. Using a minimum of 4 screws*,
securely attach the Quick Mount Bracket
directly to the bulkhead of the vessel
within the engine compartment.
OPERATION
Pali 9510 (Automatic Thermostat)
The Pali 9510 automatically cycles ON/OFF to regulate and maintain desired temperature.
Connect the Pali 9510 to the secured Quick Release Bracket or lay it within a dry engine
compartment. Do not place on a floor or low surface which could collect water. Plug the
heater into the appropriate 120V outlet. The LED will become green once your unit is plugged
in, indicating the unit has power and is ready to operate. The Pali 9510 will automatically
activate when the engine compartment ambient temperature drops to 45 °F (5 °C). The LED
will become red indicating the unit is now running.
Pali is designed to offer short duration protection from unexpected cold snaps up to 100
hours within an 80ft3 engine compartment at -4°F (20°C) outside ambient temperature.
2. Horizontal Use Un-secured
(Ensure boat is motionless when using
this option.) Pali can be used without
mounting the unit to the bulkhead or
engine compartment floor. With the Quick
Mount Bracket attached, the Pali can be
laid flat on any dry surface.
* SCREWS NOT SUPPLIED
– 1 –

Publicidad

loading