Package Contents And Assembly - Jeep Adventurer Manual Del Usuario

Assembled item, the handlebar must be installed using the special screws contained in the package.
Model Reference picture
Adventurer
Urban
Camou
Sentinel
Method:
Urban Camou / Adventurer:
• Open the package and remove the upper packaging materials.
• Lift the steering column and insert the handlebar keeping attention to not flatten the cables.
• Fix the steering column by folding the closing lever. Push downward the locking ring of the folding mechanism.
• Place the hook on the inner side of the steering column and insert the 2 screws (with reduced head) without tightening
them.
• Insert the screw (reduced head) in the first hole on the opposite side of the steering wheel.
• Tighten the 3 screws previously inserted.
• Place the screw-cover plate between the remaining hole and the cover display, insert the screw (large head) and tighten
it as needed in order to not damage the plate.
• Pick up the product from the package, open the kickstand and check for the product stability.
• Adjust the steering wheel closing mechanism (if * needed).
• Check the tire pressure (see the side of the tire for the recommended value).

2. Package contents and assembly

In the package
1x
1x
4x
1x
4x
1x
1x
1x
1x
1x
4x
1x
4x
1x
07
Handlebar assembly
Allen key
Battery charger
Handlebar screws
Air chamber
Stickers
Screw-cover plate
Transport hook
Follow the steps on the
next paragraph to properly
Adaptor for tires
assemble the parts shown in
inflation
the image.
Allen key
Battery charger
Handlebar screws
Air chamber
Stickers
Insert the 4 screws manually
Adaptor for tires
without tightening them, then
inflation
use the hex wrench supplied
to tighten them and secure the
handlebars.