Publicidad
Troubleshooting
Find additional care instructions for stainless steel and glass surfaces
online on
bject_id=69917
11
Troubleshooting
Fault
The beverage cen-
ter does not work.
The beverage cen-
ter is not cold
enough.
32
Possible cause
The beverage center is not con-
nected to a power supply.
The beverage center is switched
off.
The circuit breaker tripped.
The fuse has blown.
The temperature is not set prop-
erly.
The ambient temperature could
require a higher temperature set-
ting.
The door was opened frequently. ➤ Do not open the door more
The door was not closed prop-
erly.
The door is not hermetically
sealed.
The condenser is too dirty.
The ventilation opening is
blocked.
Delta15F–24F, Eagle15F–24B–24D–24F
Remedy
➤ Connect the beverage cen-
ter, see chapter "Connecting
the beverage center to the
power supply" on page 26.
➤ Switch the beverage center
on, see chapter "Switching
the beverage center on/off"
on page 29.
➤ Switch on the circuit breaker.
➤ Replace the fuse.
➤ Check the set temperature.
➤ Set a higher temperature (see
chapter "Setting the tempera-
ture" on page 29).
often than necessary.
➤ Close door properly.
➤ Check the door seal and clean
it.
➤ If necessary, contact an autho-
rized service agent to replace
the seal.
➤ Clean the condenser.
➤ Clean the ventilation open-
ings.
EN
Publicidad
Solución de problemas
