Descargar Imprimir esta página

Troubleshooting; Technical Data; Disposal; Meaning Of The "Dustbin" Symbol - Profi Cook PC-EWB 1187 Manual De Instrucciones

Ocultar thumbs Ver también para PC-EWB 1187:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 22
Problem
Possible Cause
No function.
No power supply.
The appliance is faulty.
Compressor noisy.
Mains power supply too low.
flashes. Water refill.
Control lamp
The ice cube container is full.
The control lamp
lights up.
The ice cubes are too
Surrounding temperature is
small.
too high.
The water temperature is too
high.
Ice cube size has been wrongly
selected.
Smaller ice cubes are normal during the first production cycles.
Ice cubes are too large
Water temperature or ambient
and stick together.
temperature too low.
The water tray is blocked by
The
icon lights up.
oversized ice cubes.

Technical Data

Model:.............................................................. PC-EWB 1187
Voltage supply: .........................................220 – 240 V~, 50 Hz
Power input: ..................................................................0.68 A
Ice cube production: ................................. 10 – 15 kg / 24 hours
Water tank volume: ......................................approx. 1.7 litres
Refrigerant: ......................................................... R600a / 23 g
Insulation blowing gas:.......................... C
Protection class: .....................................................................
Climate class: ........................................................................T
Net weight: ....................................................... approx. 9.2 kg
The right to make technical and design modifications in
the course of continuous product development remains
reserved.
This appliance has been tested according to all applicable,
current CE directives and built according to the latest safety
regulations.
12
PC-EWB1187_new - SH separat

Troubleshooting

Solution
Test the socket with another appliance.
Plug in the mains plug correctly.
Check the main circuit breaker.
Contact our service centre or a specialist.
Turn the appliance off and check the mains power supply.
Add water as described in the chapter "Operation"
"Making Ice Cubes".
Empty the ice cube container.
Place the appliance in a cooler location. Make sure there is
adequate air circulation around the appliance.
Stop the ice production. Drain some water and refill cold
water (max. 20 °C).
Use the MODE button to select one of the larger ice cube
sizes M or L.
Stop ice cube production. Drain off some water and refill with
lukewarm water (max. 35 °C).
Wait until the ice cubes are loosened. Switch the appliance
on again. Start again with the ON / OFF button.

Meaning of the "Dustbin" Symbol

H
(cyclopentane)
5
10
This helps avoid the potential effects of incorrect disposal
on the environment and human health.
This will contribute to the recycling and other forms of
re-utilisation of electrical and electronic equipment.
Information concerning where the equipment can be
disposed of can be obtained from your local authority. Your
dealer and contractual partner is also obliged to take back
the old appliance free of charge.

Disposal

Protect our environment: do not dispose of elec-
trical equipment in the domestic waste.
Please return any electrical equipment that
you will no longer use to the collection points
provided for their disposal.
27.09.22

Publicidad

Solución de problemas

loading