Assembly - Skywalker Trampolines SAK140 Manual Del Usuario

ASSEMBLY

STEP 1
1
Frame Leg (x2)
STEP 2
3
M6x40mm Bolt (x2)
(6)
2
Ladder Step (x1)
6
M6 Nut (x2)
(3)
(3) (6)
Place the two frame legs (1) on a clear area. Then, place one
of the ladder steps (2) onto the bottom of each frame leg.
Next, slide the step up until the top bolt holes of the legs and
step line up.
Note: Make sure the checkered pattern of the step is facing up!
(2)
(1)
(1)
Insert two M6x40mm bolts (3) through the ladder step and
frame leg.
Then, tighten one M6 nut (6) on the back of each bolt.
(6)
6 6
(6)
(3)
(3)