Mellerware ICE MASTER 110W Manual De Instrucciones página 2

Dear customer,
Thank you for choosing to purchase a Mellerware brand
product. Thanks to its technology, design and operation
and the fact that it exceeds the strictest quality standards,
a fully satisfactory use and long product life can be
assured.
1. Parts description
1. Ice scoop
2. Ice full sensor
3. Ice basket
4. Top cover with transparent window
5. Air vent
6. Water stopper/draining cap
7. Maximum water level
A. Timing function: Set the timer to switch on or off.
B. Automatic cleaning function: the function is effective
when the machine is in standby mode, and the cleaning
time is 30 minutes
C. On/Off button: on and off for making ice.
D. Large ice button: increasing timing when setting.
E. Small ice button: decreasing timing when setting.
F. Ice full indication: reminder when the is full
G. Display of temperature and time: indicates the
temperature when on standby, countdown in hours,
automatic cleaning countdown minutes and making
countdown seconds when working.
H. Dehydration instructions: reminder to add water.
2. Safety advice and warnings!
Read these instructions carefully before switching
on the appliance and keep them for future reference.
Failure to follow and observe these instructions could
lead to an accident. Clean all the parts of the product
that will be in contact with food, as indicated in the
cleaning section, before use.
2.1. Use or working environment:
2.1.1. Keep the working area clean and well lit.
Cluttered and dark areas invite accidents.
2.1.2. Use the appliance in a well-ventilated area.
2.1.3. Do not place the appliance on hot surfaces, such
as cooking plates, gas burners, ovens, or similar items.
2.1.4. Keep children and bystanders away when using
this appliance.
2.1.5. Place the appliance on a horizontal, flat, stable
surface suitable for withstanding high temperatures and
away from other heat sources and contact with water.
2.1.6. Keep the appliance away from flammable material
such as textiles, curtains, cardboard, or paper, etc.
2.1.7. Do not place flammable material near the
appliance.
2.1.8. Do not use the appliance in association with a
programmer, timer or other device that automatically
switches it on.
2.1.9. Do not use the appliance if the cable or plug is
damaged.
2.1.10. Ensure that the voltage indicated on the rating
label matches the mains power supply voltage before
plugging in the appliance.
2.2.11. Connect the appliance to the mains power
supply with an earth socket withstanding a minimum of
10 amperes.
2.1.12. The appliance's plug must fit into the mains
power supply socket properly. Do not alter the plug.
2.1.13. If using a multi plug check ratings carefully as
the current used by several appliances could easily
exceed the rating of the multi plug.
2.1.14. If any of the appliance casings breaks,
immediately disconnect the appliance from the mains
power supply to prevent the possibility of an electric
shock.
2.1.15. Do not use the appliance if it has fallen on the
floor or if there are visible signs of damage.
2.1.16. Do not force the power cord. Never use the
power cord to lift, carry or unplug the appliance.
2.1.17. Do not wrap the power cord around the
appliance.
2.1.18. Do not clip or crease the power cord.
2.1.19. Do not allow the power cord to hang or to
encounter the hot surfaces of the appliance.
2.1.20. Check the state of the power cord. Damaged or
tangled cables increase the risk of electric shock.
2.1.21. The appliance is not suitable for outdoor use.