Publicidad
Idiomas disponibles
Idiomas disponibles
Before installation
Read through the following instructions before installing the dryer, and keep this manual
for future reference.
WARNING
Certain internal parts are intentionally not grounded and may present a risk of electric
shock only during servicing. Service Personnel - Do not contact the following parts while
the appliance is energized: Control board, Motor, Drain pump.
Key installation requirements
• A grounded electrical outlet.
• A power cord for electric dryers (except in Canada).
• A sink or drain pipe if you want to drain the water captured during drying through the
supplied long drain hose. (See page 20.)
WARNING
Remove the door from all discarded appliances to prevent a child from suffocating.
Location considerations
The dryer should be located where there is enough space at the front for loading the
dryer, and enough space behind for the exhaust system. This dryer is factory-ready for
the rear exhaust option. To exhaust out the bottom, right or the left, use the accessory
exhaust kit. Instructions are included with the kit. Make sure the room in which the dryer
is located has enough fresh air. The dryer must be located where there are no air-flow
obstructions.
The dryer must not be installed or stored in an area where it will be exposed to water
and/or weather. The dryer area must be kept clear of combustible materials, gasoline, and
other flammable vapors and liquids. A dryer produces combustible lint. The area around
the dryer should be kept lint-free.
DV6900B_LED_WEB_Heatpump_EN.indd 9
English 9
2022/6/23 16:15:45
Publicidad
Solución de problemas
